The CWEJMAN MMF-2 Battleship Grey module is a versatile stereo multi-mode filter that can help users experiment with mono and stereo audio material by providing a variety of modifications and reshaping options. The module contains three functional blocks: filter, saturation stage, and mix. The filter block is based on two four-pole multi-mode filters with several selectable outputs, while the saturation stage includes both post and pre-modes of saturation. The mix block controls the proportion between the dry and wet audio signal, and the direct outputs are not affected by the mix. With CV-controllable parameters, the MMF-2 provides endless possibilities for sound manipulation.
read moreExploring the Dual State-Variable Filter: ALM Busy Circuits MCFx2 Eurorack Module
The ALM Busy Circuits MCFx2 Eurorack module is a powerful dual state-variable filter with numerous routing capabilities, ideal for generating or processing sound in a modular system. With two independent low pass filters featuring a range of CV controls, 1V/Oct tracking inputs, and three outputs (low pass, high pass, and a switchable band pass/notch filter), the MCFx2 offers a flexible and dynamic approach to shaping timbres. Additionally, the unit features a Link button for synchronized control over both filters, and a Feed button for feeding filter one into filter two, creating complex and interesting soundscapes.
read moreExploring the Dynamic Sound Sculpting Capabilities of Kassutronics Wavefolder Eurorack Module
The Kassutronics Wavefolder Eurorack module is a highly versatile tool for sound shaping and synthesis, featuring voltage-controlled wavefolding and a range of controls for symmetry and overdrive. With its integrated VCA and expansion points for extra CV inputs, this eight-hp module has the ability to create a rich range of timbres and textures that can be used in a variety of musical contexts. This article explores the unique dynamic sound sculpting capabilities of the Kassutronics Wavefolder module, highlighting its ability to produce complex and nuanced sounds that are ideal for electronic music production and performance.
read moreExploring Sound Convergence: The Versatile Meridian Eurorack Module
The article explores the Meridian Eurorack module, a versatile dual multimode filter array that offers users a wide range of options to shape and blend sounds. With four selectable filter types per side, four selectable filter modes per side, and additional effects including drive and phase shift, the Meridian allows for the creation of unique textures and sonic landscapes. The module's name conveys the idea of convergence and balance, while also emphasizing the separation and refinement of different sonic elements. It features independently adjustable cutoff, resonance, and contour parameters, as well as a ping function for dynamic control. The module can be used in serial or parallel routing configurations and can function as a stereo system or two independent mono channels. The article highlights the diverse filters available, including ladder, OTA, comb, and vocal formant, as well as the distinct phase shifter and drive effects. All key features can be modulated via CV inputs, allowing for customization and synchronization to tempo. Overall, the Meridian is designed for tweak-ability and performance, offering users a powerful tool for sound manipulation and exploration.
read moreEmbrace the Nostalgia: Create Unique FM Sounds with NoisyFruitLab's FM4 Eurorack Module
The NoisyFruitLab FM4 Eurorack module is a classic radio FM transceiver module that allows users to create unique FM sounds. With CV inputs for tuning and level control and main pots that act as offset controls, the FM4 is a fantastic random chopping source for all kinds of artifacts found in the FM universe. The module can also be used to listen to radio stations traditionally, with a typical eurorack wire antenna and fancy LED indication for the final output stage. The FM4 is an 8HP module with a depth of 30mm, +12V 33mA, and -12V 12mA.
read moreBongo Fury: Exploring the Triple Version of the nonlinearcircuits Bongo Eurorack Drum Module
The Triple Version of the nonlinearcircuits Bongo Eurorack Drum Module is a simple yet powerful module that adds character to any music set up. This module can be controlled by both trigger and CV inputs, allowing for self-oscillation and rubbery bass-y sounds. The circuits are driven by twin-T oscillators and LEDs, which act as nonlinear resistors in one section. This version provides the option for placing zener diodes, limiting the output to +/-5V. The upper two sections have zeners, while the bottom one can run wild. Those interested in having all section outputs zener limited to +/-5V or all sections cut loose can message the provider. The nonlinearcircuits Bongo Fury is a highly recommended module for those seeking an untethered, yet controlled, sound.
read moreBefaco Lich: Unleashing Endless Possibilities with the Programmable Multi-Function Module
The Befaco Lich is a programmable multi-function module based on the Rebel Technology OWL platform, resulting from a collaboration between Befaco and Rebel. This module offers stereo in and out, four pot controls with cv inputs, CV and Gate outputs, patch selection with display, and USB MIDI host and device connections. With its 48k 24-bit audio capabilities and various control options, the Befaco Lich opens up a world of possibilities for patch programming and visual interface exploration.
read moreALM Busy Circuits MFX: A Compact Stereo Multi Effects Processor for Your Eurorack System
The ALM Busy Circuits MFX is a compact 6HP Eurorack stereo digital audio multi-effects processor that offers a total of 14 different full-featured effects programs plus a number of metering utilities. It features a user interface designed to be familiar, quick, and easy to use, with each program containing a wide range of controllable parameters that are either directly editable or freely assigned to CV or clocked control. Additionally, the MFX includes factory presets as well as the ability to store and recall user presets, and all settings remain between power cycles. The module features stereo I/O paths, three freely assignable CV inputs, and one clock/trigger input, with support for the 'Axon-1' expander for up to seven assignable CV inputs. It is skiff-friendly with reverse power protection and made in England.
read moreAdding Color and Texture to Your Eurorack Sound with the Modbap Modular HUE Audio Processor Module
The Modbap Modular HUE Eurorack module is a 6hp audio colour processor with a chain of four effects (Drive, Filter, Tape Saturation, LoFi) and a Compressor. HUE is designed to bring the big, bold, textural sound of classic drum machines and LoFi boombap production into the Eurorack format. This module is great for adding colour and texture to both drums and melodic content, and can serve as the final glue in the signal path. With CV inputs for Drive, Filter, Tape Saturation, and LoFi, HUE offers loads of creative modulation possibilities.
read more