Unleash the sonic potential with the Triphase Oscillator; explore phase cancellation, pulse width modulation, and supersaw-like behavior in a versatile analog module.
read moreOther articles
Unleashing the Power of Precision: A Review of the WMD Legion Eurorack Module
WMD Legion is an eight-HP oscillator that comes with an SSI2130 TZFM oscillator chip and a host of useful CV inputs. It features individual waveform outputs, a separate exponential FM input with correlating attenuator, octave switches, and a unique saw wave section inspired by the oscillator in the Alpha Juno synthesizer. The oscialltor features digital calibration, and once one tunes, one will stay in tune. The tune knob can be switched between fine and coarse modes and can be locked out to protect against unintentional movement during a performance. It has a sub-oscillator with switchable octave and Saw, Triangle, Square, and PW waveforms, a first in Eurorack in that it also fully reacts to Thru-Zero FM. The module uses very little power and stays cool and consistent in temperature, meaning it is stable for tuning. However, the downside is that these power supply parts and special opamps are entirely unavailable due to the worldwide semiconductor shortage, and only 600 Legions are available since no other runs are planned.
read moreGet Spooked with Frequency Central's Horror Show: The Ultimate Noise Generator, Ring Modulator, and Sub Oscillator Eurorack Module
The article "Get Spooked with Frequency Central's Horror Show: The Ultimate Noise Generator, Ring Modulator, and Sub Oscillator Eurorack Module" features the Horror Show, a 4HP module that combines a noise generator with filter frequency control, a digital ring modulator, and a sub oscillator with three simultaneous outputs. The noise output is normalized to RM X input and Sub Osc input, allowing for five types of noise that can be further affected by twisting the filter frequency knob. The module can also be used as a pulse width modulator and a clock divider. This module is a great addition to any eurorack setup, especially for those looking to create experimental and spooky sounds.
read moreExploring the Versatility of the 3340 VCO Eurorack Module by Guru Gara Synth
The Guru Gara Synth 3340 VCO Eurorack module is a versatile analog voltage controlled oscillator that can generate three wave forms (square, triangle, ramp), with a triangle to sine converter. It features hard and soft sync inputs, a linear frequency modulation input, and 1 volt per octave input with solid tracking. The pulse width can be adjusted for the square wave, which can also be modulated with an external CV. The module is available as a PCB and front panel kit or a built unit, with the front panel made out of PCB and screen printed by hand.
read moreExploring the Unique Sound and Features of the Grendel Drone Commander 2 Eurorack Module 2020 with Silver Panel Version
The Grendel Drone Commander 2 is a unique Eurorack module that expands upon the sound and features of its predecessor, the Drone Commander. It offers an extensive clock generator and LFO section, two oscillators, mix control, and resonant bandpass and low pass filters. The module also includes an envelope, glide, and switching functions on each of its 12 potentiometers for increased control. The Drone Commander 2 has a distinct transistor sound and internal rhythmical modulation, making it a versatile and creative tool for electronic musicians and sound designers.
read moreExploring the Diverse Soundscapes of Make Noise XPO: A Comprehensive Review
The article 'Exploring the Diverse Soundscapes of Make Noise XPO: A Comprehensive Review' delves into the capabilities of the Make Noise XPO eurorack module. This Voltage Controlled Analog Oscillator generates a range of waveforms like Sine waves, Triangle waves, Sawtooth, and Spike waves, among others, and also features Stereo Timbre Modulation, Oscillator SYNC, Linear FM, and more. The comprehensive review explores the module's multiple functionalities and highlights its diverse soundscapes.
read moreDiscover the ALSTADEN Eurorack Module: An Analog Waveshaping Oscillator, Waveshaper, and VCA All Rolled Into One
The ALSTADEN Eurorack Module is an analog waveshaping oscillator, waveshaper, and VCA in one, offering harsh and harmonically rich sounds. Its five different waveforms can be adjusted with sliding potentiometers, and wavefolding can be controlled with SHAPE A and SHAPE B knobs and CV inputs. The SUBOCTAVE has two stages of -1 and -2 octaves. The TONE control allows equalization of the output before it is fed to an internal VCA, controlled via the ENV IN socket. Linear and exponential FM can be applied via the FM input, while the V/OCT input controls pitch. Two audio inputs, EXT IN A and B, enable external signals to be routed through the module's functions.
read more