The Guru Gara Synth 3340 VCO Eurorack module is a versatile analog voltage controlled oscillator that can generate three wave forms (square, triangle, ramp), with a triangle to sine converter. It features hard and soft sync inputs, a linear frequency modulation input, and 1 volt per octave input with solid tracking. The pulse width can be adjusted for the square wave, which can also be modulated with an external CV. The module is available as a PCB and front panel kit or a built unit, with the front panel made out of PCB and screen printed by hand.
read moreExploring the Unique Sound of the Eurorack Module: MFE 303 Triple Multimode Steiner Parker Filter, Mixer, and Equalizer
The MFE 303 Eurorack module is a versatile filter module consisting of three Steiner-Parker filter units, light overdrive input amplifiers, 3-channel equalizer, and an audio summing mixer. The module features a fully analog equalizer with three bands- treble, middle, and depth, each with unique characteristics. The filter channels can be controlled using potentiometers and CV inputs, making it ideal for live performance. The sound of the Steiner-Parker filter units is unique and precise, with modified difficulties of uncontrolled self-oscillation and resonance feedback. This module is also suitable for stereo filtering as incoming audio material is routed to all filter channels if required.
read moreExploring the Twisted Brother of Compressors: Introducing the Cosmotronic Peradam Eurorack Module
The Cosmotronic Peradam is a unique analog distortion module with an internal sidechain that creates complex self-distortion sounds in the main signal. The side-chain is modulated by itself to create a signal at twice the frequency of the original and then modulates the amplitude of the VCA. The module also has a dual-band drive circuit before entering a soft clipper output stage. It allows for a broad palette of distortions, from subtle saturation to massive clipping and complete destruction. The module comes with a +6dB gain switch on the input and a blend slider to dial in your tones. The Cosmotronic Peradam is available for pre-order at an MSRP of €270 and is estimated to ship in January 2022.
read moreExploring the Unconventional Tones of Sovage Engineering's LE DECHU Convulted Analog Polymorph VCO/LFO Eurorack Module
The Sovage Engineering LE DECHU Convulted Analog Polymorph VCO/LFO Eurorack Module is a convoluted analog VCO and LFO that offers unconventional waveforms and tones like strings and wind instruments or electric pianos and organs from another world. The ALTERATION knob can act as a pseudo filter while the FULL/DIVIDED and SURGE/ODD/RIDGE switches provide a total of 6 starting shapes to tweak. The module can be used as a classic VCO/LFO using the SEMICIRCLE and TRAPEZOID outputs and the standard RAMP output. The CLIPPING DEPTH knob can add a variable pulse wave to the total mashup combined with a hard clipping stage to design and drive waveforms to a more heavy tone. LE DECHU can accurately track 1v/octave and stay in tune, making it a versatile and unique choice for sound designers.
read moreExploring the Sound Capabilities of Erica Synths Black VCO2: An Analog VCO with Unique Waveshaping Features
The Erica Synths Black VCO2 is an all-analog, highly accurate and stable VCO that features four simultaneous waveform outputs, a one-octave down sub-oscillator, a SAW waveshaper, and two modulation LFOs. The module is designed to provide a distinct, rounded square wave, unlike the harsh, logic divider based sub-oscillators. With its skiff-friendly design and a wide octave range, the Erica Synths Black VCO2 is an excellent analog sound source with plenty of patch points for modular use. This article explores the sound capabilities of the module, highlighting its unique waveshaping features and its potential uses in electronic music production.
read moreExploring the Mighty Oscillations of the Intellijel VCO-1U: A Syncable and Multi-Waveform Analog Module for your Eurorack Setup
The Intellijel VCO-1U is a versatile and compact eurorack module that offers a range of pure waveforms, precise tracking, and multiple modes of operation. It can be used as a utility modulation source or as a primary sound source. Its key features include four simultaneous pure waveforms, pitch input for 1V/Oct tracking and FM, SYNC input for Hard Sync, and a three-position octave switch for jumping pitch up or down by two octaves. The module also has a bicolor LED that indicates the state of the triangle core rate. This article explores the powerful oscillations of the Intellijel VCO-1U and its potential applications in a eurorack setup.
read moreExploring the MachineRoom 204D Dual VCF: A True Analog Filter with Sine Wave Oscillator Capabilities
The MachineRoom 204D Dual VCF is an analog dual voltage controlled low-pass filter with a cut-off slope of -24 dB/octave as in various Moog synthesizers. It has separate controls for both sections and 4 CV inputs for cutoff modulation, making it versatile for both mono and stereo operations. The module also has an adjustable resonance all the way up to self-oscillation, allowing it to behave like a sine wave oscillator with V/Oct tracking up to 4 octaves. Its skiff-friendly design makes it a great addition to any Eurorack system.
read moreExploring the Enhanced Features of the Topobrillo Sport Modulator 2: A 100% Analog Dual Lag and Hold Device for Creative Eurorack Patching
The article explores the enhanced features of the Topobrillo Sport Modulator 2, a 100% analog dual lag and hold device for creative Eurorack patching. The revised Sport Modulator 2 has been redesigned from the ground up with tons of added features and improved functionality, while still being patch-programmable and true to the original. The article provides user-written documentation, a patch book, and a user's guide for the module.
read moreExploring New Sonic Horizons with the Pittsburgh Modular Taiga: A Comprehensive Review
The Pittsburgh Modular Taiga is a modern modular instrument that allows exploration beyond traditional analog synthesizers. The Taiga stands out with a trio of huge analog oscillators, the smooth Pittsburgh Filter, and the warmth of the Dynamics Controller, creating new sonic textures and performance possibilities. This comprehensive review covers all aspects of the Taiga, showing how it is possible to break new ground in sound exploration with this full synthesizer voice.
read moreExploring New Soundscapes with PLXNA2: A High-Quality Analog Signal Processor
The article 'Exploring New Soundscapes with PLXNA2: A High-Quality Analog Signal Processor' delves into the benefits and features of using the PLXNA2 module to create unique sounds and waveforms. The 22HP eurorack module is capable of processing VCO waveforms and offers a variety of inputs and outputs to experiment with. The article highlights the handmade analog high-quality signal processor and recommends patching VCO 1 into Enter and VCO 2 into AM CV input while patching a third VCO or alternate waveform from VCO 1 or 2 into FM CV input. The PLXNA2 module requires external power and comes with a 12v DC Center Positive power supply.
read more