The G-Storm Electro SH5-VCF is an all-analog Eurorack module that adapts the Roland SH-5 mixer and dual filter. It features a voltage-controlled filter with a unique design, a separate bandpass filter with a proprietary voltage-controlled feedback path, and a four-channel mixer. The SH5-VCF uses all discrete components and op-amps and has three CV modulation options. The article emphasizes that the filter experience is best complemented with a VCA and recommends the G-Storm Electro 2xVCA. However, readers must note that the module is unavailable until 2024 due to parts shortage.
read moreGet Groovy with the 4ms Company SCM Shuffling Clock Multiplier V2 (Black Panel) Eurorack Module
The 4ms Company SCM Shuffling Clock Multiplier V2 (Black Panel) is a clock multiplier Eurorack module that produces eight multiplied clock tempos, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled/swung, and the amount of shuffle is controlled by a CV Slip jack. Additionally, a Rotate CV jack re-assigns the multiplication number of each jack. This module has five Slipped/Shuffled/Skipped clock outputs, three steady clock outputs, and can connect to the SCM Breakout for more features. The black panel version is not available as a built unit from 4ms, but black panels are available separately for users to install in place of the standard silver panel.
read moreExploring Versatile Modulations: An In-Depth Look at the cubusynth-4vclfo Eurorack Module
The cubusynth-4vclfo Eurorack module, featuring four triangle waveform Low-Frequency Oscillators (LFOs), is a versatile modulation tool for creating intricate and dynamic patches. Each LFO has a frequency knob and CV inputs with attenuators, allowing for precise control over modulation rates. Additionally, the "Aux" input is normalized to the four CV inputs, enabling simultaneous modulation of all LFOs with a single signal. Plugging a cable into a CV input breaks its connection from the aux input, providing more opportunities for experimentation. Overall, the cubusynth-4vclfo is an essential addition to any modular setup focused on creative modulation.
read moreExploring the Versatility of the Cre8audio Function Junction Eurorack Module
The Cre8audio Function Junction Eurorack module is a versatile tool that can be used as an envelope generator, voltage controlled LFO, slew generator, gate signal delay, envelope follower, clock source, voltage controlled clock divider, and more. The module features a fully analog Pittsburgh Modular Synthesizers developed 4 stage ADSR circuit with independent Attack, Decay, Sustain, and Release controls, with a voltage output range of 0V - 10V. Its Function Generator allows for control of attack, decay, response curve, and modulation input with a voltage output range of +/-5V. The module also includes a triangle and square LFO with a dedicated rate knob and LFO output voltage of +/-8V. Additionally, the module has a 3 channel attenuverting mixer with OR circuit and multiple output jacks for independent use.
read moreExploring the versatility of LVL, the Eurorack Dual Signal Summator Module
The article 'Exploring the versatility of LVL, the Eurorack Dual Signal Summator Module' delves into the capabilities of the LVL module, which excels in the backbone operations of modular synthesis: addition, subtraction, attenuation, and inversion of signals. LVL provides two identical manually controlled voltage summators, with three inputs each and a switch that selects between attenuator or attenuverter action of the summator. The module is fit with bicolor LED indicators and is normaled to a 3-input, 2-output mini matrix mixer if only Summator 1 inputs are used. With its versatile voltage summation capabilities, LVL is an essential module for any Eurorack setup.
read moreExploring the Versatility and Updates of the ALM Busy Circuits Pip Slope Mk II: A Compact Envelope and Function Generator in 4HP
The ALM Busy Circuits Pip Slope Mk II is a compact envelope and function generator that supports both Attack/Decay and Attack/Sustain/Decay type envelopes with control over Attack and Decay times. The module features morphing between exponential, linear and logarithmic type slopes, and offers loop modes that can repeat infinitely or decrease with time or amplitude for echo and bouncing ball type effects. Improvements in the updated version include increased output resolution, finer control of fast envelopes, a new morphing shape control, switchable 5v or 8v maximum envelope level, additional loop modes, and an additional trigger output. The module is skiff friendly and designed and made in the UK.
read moreExploring the Vast Soundscapes of Xaoc Devices Sofia: A Transcendent Waveform Analog Oscillator
The article titled 'Exploring the Vast Soundscapes of Xaoc Devices Sofia: A Transcendent Waveform Analog Oscillator' delves into the unique sound generating capabilities of the Sofia Eurorack module. Based on an original waveforming principle, it produces a warm saturated base tone mixed with two modulating ripple elements, which can be extensively self-patched and animated for complex sound shaping. The module allows for a wide range of possible sounds including woody pings, warm evolving tones, and bright sparkles among others. The article recommends pairing Sofia with filters, but it can also work well with a VCA.
read moreExploring the Upgraded Capabilities of the Toppobrillo Multifilter 2 Eurorack Module
The Toppobrillo Multifilter 2 is an upgraded version of its predecessor, coming with a range of additional functions and features. The new design includes a dual-input crossfading mixer with voltage-controlled gain, a variable mode output with continuously-variable voltage-controlled response, and a dedicated "ping" input that percusses the filter. The module also offers a shallow form-factor and low noise design, with an MSRP of $249. The enhanced capabilities of the Multifilter 2 make it a valuable addition to any eurorack setup.
read moreExploring the Unpredictable and Evolving Sounds of the Reverse Landfill Noise V9 Eurorack Module
The Reverse Landfill Noise V9 Eurorack Module is a patchable noise source that creates unpredictable and evolving sounds through four square wave oscillators that modulate each other, go through a clock divider, and are mixed. With 20 patchpoints and the ability to patch LDRs or resistors into the patchbay, this module is suitable for creating harsh noise, random control voltage, snares, hi-hats, or "unpure" audio textures. The article explores the unique features of the module and the different combinations that can be made for even more variation in sound.
read moreExploring the Unique Sound and Features of the Grendel Drone Commander 2 Eurorack Module 2020 with Silver Panel Version
The Grendel Drone Commander 2 is a unique Eurorack module that expands upon the sound and features of its predecessor, the Drone Commander. It offers an extensive clock generator and LFO section, two oscillators, mix control, and resonant bandpass and low pass filters. The module also includes an envelope, glide, and switching functions on each of its 12 potentiometers for increased control. The Drone Commander 2 has a distinct transistor sound and internal rhythmical modulation, making it a versatile and creative tool for electronic musicians and sound designers.
read more