The Ladik S-316 is a versatile 16-step CV sequencer module designed for Eurorack systems. It features clock and reset inputs with accompanying LEDs and manual buttons, gate output with LED, 16-step CV knobs with on/off switches, sequence length knob with LED, and gate length knob with CV in jack. The module also includes four mode switches, CV out jack, and direction options of up, up/down (pendulum), and random. The range can be switched between 5 octaves unquantized, 5 octaves quantized in semitones, and 2 octaves quantized in semitones. The S/H function can be turned on/off and the repeating of certain steps can be adjusted with the sequence length knob. Its compact design takes up only 22TE/ 22HP/ 112mm of width and 35mm /1.4" of depth, with a maximum current of 35mA.
read moreGet Your Portable Eurorack System Rolling with the ST MIXER: A 5-Channel Stereo Panning Mixer with Headphone Amplifier
The ST MIXER is a versatile and portable 5-channel stereo panning mixer with a built-in headphone amplifier. It is a great final output module for a small eurorack system designed for use with headphones or portable recorders. The mixeur has three mono channels with level and panning control and one stereo channel with level control and separate inputs for left and right. It also has a stereo headphone output with level control that can drive most headphones and doubles as a recording output. The ST MIXER is perfect for a starter eurorack system with a couple of synth voices and a stereo effect. It is available as a DIY kit from Thonk and Exploding Shed.
read moreExploring the Warm Crunch of Super Synthesis TVCA: Reviewing the Simple yet Effective 2-Input VCA with Smooth Distortion
The article titled 'Exploring the Warm Crunch of Super Synthesis TVCA: Reviewing the Simple yet Effective 2-Input VCA with Smooth Distortion' provides a comprehensive review of the Super Synthesis TVCA, a two-input VCA module with a smooth distortion circuit. The article highlights the TVCA's features, including individual gain per input, a CV input to control the VCA, and a single output that mixes both inputs. The review also covers the TVCA's smooth and warm distortion, which is perfect for adding character to a modular synth setup without overwhelming the signal. Overall, the article provides a positive evaluation of the TVCA and its capabilities.
read moreExploring the Versatility of uPeaks Black: A Mutable Peaks Eurorack Module with Multiple Waveform Options and an 808 Drum Sound Emulator
The article "Exploring the Versatility of uPeaks Black" highlights the features of the Mutable Peaks Eurorack module. This module comes with multiple waveform options, an 808 drum sound emulator, and can be split into two independent units with separate triggers. The author emphasizes how this module's Dead Man's Catch alternative firmware can add new dimensions to sound design and experimentation. The module is also aesthetically pleasing, as it is built by hand in Los Angeles and features metal-shaft T18 pots with Befaco micro knobs and a high-quality aluminum panel. Overall, the uPeaks Black is an excellent addition to a modular synthesizer setup for those who want to experiment with waveform options and drum sound emulation.
read moreExploring the Versatility of the Noise Engineering Quantus Trajecta: A Quad Envelope with Polyphony in Mind
The Noise Engineering Quantus Trajecta is a quad envelope designed with polyphony in mind. The universal controls adjust all four envelopes simultaneously, making it easy to keep separate voices related on the fly. Designed with the structure of the envelope from the Cursus and Loquelic Iteritas Percido in mind, the module also includes additional shape control with the addition of Tremolo and ADSR modes. The Quantus Trajecta is a versatile, performable, and utilitarian module suitable for any musician.
read moreExploring the Tonality of Instruō Neóni: An Analog Oscillator with Through-Zero FM Functionality
The Instruō Neóni is an analog oscillator with through-zero FM functionality that sets it apart from other oscillators in the Instruō product line. Its precision soft sync and directional hard sync modes, nonlinear wavefolding, and internal modulation routings make it the most tonal FM sounds imaginable. Unlike traditional FM, where an oscillator momentarily stalls as negative voltage pulls its frequency down to 0 Hz, Neóni inverts the polarity of its waveforms until positive voltage pulls it back through 0 Hz. This behavior allows for complex waveforms with less non-harmonic sidebands. The module also has linear through-zero and traditional FM with AC and DC coupled functionality, split sawtooth morphing, individual waveform outputs, and LFO mode. Overall, the Instruō Neóni is an excellent choice for anyone looking to explore the tonality of through-zero FM.
read moreExploring the Creative Possibilities of ADDAC System ADDAC304 Manual Gates in Your Eurorack Setup.
The article "Exploring the Creative Possibilities of ADDAC System ADDAC304 Manual Gates in Your Eurorack Setup" delves into the features of the ADDAC304 Manual Gates, an 8-gate module with an intriguing twist: four of the gates can function as momentary switches when their corresponding buttons are pressed. The article discusses how these gates can enhance performance and modulation capabilities in a Eurorack setup and outlines creative ways to incorporate them into a modular system.
read moreExploring the Capabilities of the Steady State Fate Zephyr Through-Zero Oscillator
The Steady State Fate Zephyr Through-Zero Oscillator is a powerful analog VCO that combines features from the Spectrum VCO and the Zero Point Oscillator. The module features an 8 octave rotary switch, variable response TUNE control, dedicated SINE, TRIANGLE, and SAW outputs, and PWM Pulse output with two types of PWM. Additionally, the Zephyr has a voltage controlled Z-WAVE output, dedicated normal FM input, and a multi-mode ZMOD input with attenuator and INDEX VCA CV input. The ZMOD modes include true Through-Zero Phase Modulation, ZYNC (hybrid reversing sync with linear TZPM), and FLIP (hard waveform reversal). This module is a must-have for any enthusiast interested in exploring the capabilities of through-zero oscillators.
read moreExploring New Sonic Horizons with the Pittsburgh Modular Taiga: A Comprehensive Review
The Pittsburgh Modular Taiga is a modern modular instrument that allows exploration beyond traditional analog synthesizers. The Taiga stands out with a trio of huge analog oscillators, the smooth Pittsburgh Filter, and the warmth of the Dynamics Controller, creating new sonic textures and performance possibilities. This comprehensive review covers all aspects of the Taiga, showing how it is possible to break new ground in sound exploration with this full synthesizer voice.
read moreExplore Complex Modular Systems with Erica Synths Black Quad VCA2: A Versatile Four-Channel Voltage Controlled Amplifier and Mixer Module.
The Erica Synths Black Quad VCA2 is a versatile four-channel voltage-controlled amplifier and mixer module designed for complex modular systems. Featuring selectable linear/logarithmic response for each channel, manual CV bias and signal level adjustment, and sequential output mixing, this module can be used in various configurations. Additionally, the 4th channel is DC-coupled for controlling CV sources. The module's signal level indicator LEDs allow for easy monitoring of output levels. This article explores the technical specifications and features of the Erica Synths Black Quad VCA2.
read more