The Autodub module is a stereo VCA specifically designed for interactive dub style effects and event generation. It features a momentary or toggle behavior button to activate the SEND VCA, allowing for timed control of external modules and dynamic fades and modulations.
Next, we have the Agni module, which combines a voltage-controlled amplifier (VCA), wavefolder, distortion, tone control, and feedback. It offers a versatile signal processing capability and allows for modulation of one signal with another signal in the full audio range.
Moving on, the Castor & Pollux module is a dual oscillator inspired by the legendary Roland Juno synthesizer. It offers two digitally-controlled analog oscillators with the ability to layer thick detuned sounds and harmonically complex hard synced waveforms.
The Mosaic VCO module revolves around the reissue of the renowned Curtis CEM3340 IC, found in synthesizers like the Prophet 5 and Roland Jupiter Series. It offers multiple waveforms, linear and exponential FM, PWM, and sync capability.
Lastly, the Doepfer Frequency Shifter II module is a fully analog frequency shifter for audio signals. It shifts each frequency of the incoming audio signal by the same frequency, providing unique tonal effects. It also features various controls and inputs for precise frequency shifting control.
When combined, these modules offer a wide range of sound manipulation possibilities, perfect for creating captivating dub style music.
:internal_private_article_id: steady-state-fate-autodub_knob-technology-agni_winterbloom-castor-pollux-ii_mosaic-analog-vco-black-panel_doepfer-a-126-2v
In this article, we explore the combination of five Eurorack modules - Autodub, Agni, Castor & Pollux, Mosaic VCO, and Doepfer Frequency Shifter - to create unique dub style delights.
The Autodub module is a stereo VCA specifically designed for interactive dub style effects and event generation. It features a momentary or toggle behavior button to activate the SEND VCA, allowing for timed control of external modules and dynamic fades and modulations.
Next, we have the Agni module, which combines a voltage-controlled amplifier (VCA), wavefolder, distortion, tone control, and feedback. It offers a versatile signal processing capability and allows for modulation of one signal with another signal in the full audio range.
Moving on, the Castor & Pollux module is a dual oscillator inspired by the legendary Roland Juno synthesizer. It offers two digitally-controlled analog oscillators with the ability to layer thick detuned sounds and harmonically complex hard synced waveforms.
The Mosaic VCO module revolves around the reissue of the renowned Curtis CEM3340 IC, found in synthesizers like the Prophet 5 and Roland Jupiter Series. It offers multiple waveforms, linear and exponential FM, PWM, and sync capability.
Lastly, the Doepfer Frequency Shifter II module is a fully analog frequency shifter for audio signals. It shifts each frequency of the incoming audio signal by the same frequency, providing unique tonal effects. It also features various controls and inputs for precise frequency shifting control.
When combined, these modules offer a wide range of sound manipulation possibilities, perfect for creating captivating dub style music.
Example Usage
In this build, we will explore how to create dub-style delights using the Autodub, Agni, Castor & Pollux, Mosaic VCO, and Doepfer Frequency Shifter modules.
To start, let's connect the output of the Autodub module to the input of the Agni module. The Autodub module is a stereo VCA with interactive dub style stereo send/return capabilities. It features a large button on the bottom, which can be used as a momentary or toggle behavior to activate the SEND VCA. We can route audio signals through the Autodub module to add interactive dub-style effects. Adjust the DRY-WET mixer on the Autodub module to add a desired amount of the original input signal while blending it with the processed signal.
Next, we'll take the output of the Agni module and connect it to one of the inputs of the Castor & Pollux module. Castor & Pollux is a dual Juno-inspired oscillator that can add thick detuned sounds and harmonically complex hard synced waveforms. Experiment with the different waveforms and detuning options to create rich and layered sounds.
Now, we'll take the output of the Castor & Pollux module and connect it to the input of the Mosaic VCO module. The Mosaic VCO is an analog voltage controlled oscillator that is based on the legendary Curtis CEM3340 IC found in classic synthesizers like the Prophet 5 and Roland Jupiter Series. It offers multiple waveforms such as sine, triangle, sawtooth, and square. Use the Mosaic VCO to further shape and modulate the sound from the Castor & Pollux module.
To add some frequency shifting effects, we'll connect the output of the Mosaic VCO module to the input of the Doepfer Frequency Shifter module. The Doepfer Frequency Shifter is a fully analog frequency shifter that can shift the frequencies of the incoming audio signal. Adjust the shifting frequency using the manual controls or apply external control voltage for more dynamic shifts. Experiment with the Mix control to blend the up and down shifted signals.
By combining these modules, you can create a dub-inspired modular setup that offers a wide range of sound manipulation possibilities. Have fun exploring different configurations and settings to achieve your desired dub style delights.
To create a dub-style sound using the Autodub, Agni, Castor & Pollux, Mosaic VCO, and Doepfer Frequency Shifter modules, follow these steps:
- Connect the output of the Mosaic VCO to the input of the Autodub module.
- Set the Autodub to its maximum gain for both the dry and return signal.
- Use the modulation capabilities of the Mosaic VCO to create an evolving waveform, such as using exponential FM or PWM.
- Connect the output of the Autodub module to the input of the Agni module.
- Adjust the Agni's VCA to control the level of the signal.
- Engage the wavefolder on the Agni module to add harmonic complexity to the sound.
- Use the tone controls on the Agni module to shape the frequency response.
- Connect the output of the Agni module to the input of the Castor & Pollux module.
- Use the dual oscillators on the Castor & Pollux module to create layered, detuned sounds.
- Experiment with the internal LFO to modulate the oscillators and create movement in the sound.
- Connect the output of the Castor & Pollux module to the input of the Doepfer Frequency Shifter.
- Adjust the shifting frequency on the Doepfer Frequency Shifter to introduce frequency shifts to the sound.
- Use the up/down shift panning control on the Doepfer Frequency Shifter to control the direction of the frequency shift.
- Experiment with the squelch control on the Doepfer Frequency Shifter to add gating effects or dynamically control the output of the module.
- Connect the output of the Doepfer Frequency Shifter to your audio interface or mixer to hear the final dub-style sound.
By combining the Autodub, Agni, Castor & Pollux, Mosaic VCO, and Doepfer Frequency Shifter modules in this way, you can create complex, evolving dub-style sounds with a wide range of modulation possibilities. Have fun exploring the sonic capabilities of these modules and let your creativity run wild!
Further Thoughts
When it comes to creating dub-style delights in your Eurorack setup, combining modules like the Autodub, Agni, Castor & Pollux, Mosaic VCO, and Doepfer Frequency Shifter can take your sound to the next level. Here's an expert-level usage example that showcases the potential of these modules in a dub-style context:
- Start by sending your audio signal into the Autodub module. This stereo VCA is perfect for interactive dub-style effects. Use the large button on the bottom of the module to activate the effect send. You can choose between momentary or toggle behavior for the button. The SEND VCA will be controlled by the normalized voltage, and the GATE output jack will provide a gated high signal when the button is active.
- Take the output of the Autodub module and send it to the Agni module. Agni is a versatile module that combines a VCA, Wavefolder, Distortion, Tone control, and Feedback. Experiment with different settings to add texture, distortion, and character to the audio signal. The wavefolding and distortion sections can add harmonically complex and gritty sounds, perfect for dub-style effects.
- For additional sonic possibilities, introduce the Castor & Pollux module into the mix. This dual Juno-inspired oscillator brings a massive voice to your setup. Use the two digitally-controlled analog oscillators to create thick detuned sounds and harmonically complex hard synced waveforms. Experiment with layering these oscillators with the processed signal from the Agni module to create rich and evolving dub-style textures.
- To further shape the sound, incorporate the Mosaic VCO module. This all-analog voltage-controlled oscillator, based on the legendary Curtis CEM3340 IC, offers a range of waveforms, including sine, triangle, sawtooth, and square. Use the linear and exponential FM capabilities, PWM, and sync to create evolving timbres and modulate the sound in unique ways.
- To add a touch of frequency shifting goodness, hook up the Doepfer Frequency Shifter module. This fully analog frequency shifter takes your audio signals and shifts their frequencies by the same amount. Experiment with the shifting frequency controls to create dub-style pitch-bending effects. You can also connect external control voltages for more dynamic control over the shifting frequency.
By combining the Autodub, Agni, Castor & Pollux, Mosaic VCO, and Doepfer Frequency Shifter modules in your Eurorack setup, you'll have a powerful toolkit for creating dub-style delights. Dive deep into these modules' features, experiment with different settings, and let your creativity flow to produce unique and captivating dub-style music.