The Beers Edge Detector 12HP module is an innovative piece of apparatus that pierces through the unexplored depths of eurorack synthesis. Through converting gate signals into triggers across up to eight channels, it allows a certain finesse to be brought into your compositions with every signal surpassing approximately 0.5V, thus enabling the creation of precise pulse outputs. What is notably intriguing is the rising edge trigger, a unique characteristic that sets it apart from other eurorack cases. You can also adjust the pulse length per channel from around 5ms to 500ms, giving you full creative control over each pulse and its intensity.
An impressive feature of the Beers Edge Detector 12HP module is its ability to simultaneously generate pulses for both rising and falling edges. This contributes to enhancing the rhythmic complexity of your compositions and introduces an element of dynamism that keeps the melody continuously evolving.
The module also provides OR-combined outputs for odd, even, and all channels. This gives the user an efficient method to gate and mute signals via 'enable' inputs. This thoughtful design from Beers encourages seamless integration into modular setups, ensuring that any interaction with audio-rate inputs preserves the integrity of trigger signals. With just 12HP, Beers has managed to pack in unmatched functional capability.
Odd and even channels also have 'enable' inputs; when more than roughly 1V is present on their respective 'enable' input, the combined output pulses reach the ODD or EVEN output jack. This feature can be thought of a 4-input OR gate followed by an AND gate with the enable signal. The functionality of ALL output, which is the logic OR of the ODD and EVEN outputs, is affected by the enable inputs as well, creating a diverse range of sonic possibilities.
A standout element about the Beers Edge Detector 12HP is its unprejudiced acceptance of signals - it doesn't restrict to gates alone. Any typical synth signal that exceeds around 0.5V is taken in, turned into a binary high or low state, and subsequently triggers a short pulse on that channel's output. It ensures no rising edges are lost, even when running the module at audio rates, by cutting the output pulse short if the input goes low first. However, it is essential to remember that this module cannot lengthen trigger signals.
Unplugging from even-numbered channels results in a pulse on the falling edge of the signal from the odd-numbered channel above them. This fascinating workaround can be used to generate separate pulses for both the rising and falling edges of input signals. In certain scenarios, OR-combining the rising and falling edge pulses of a 50% duty cycle gate signal gives you pulses at double the input tempo/frequency, introducing a handy trick to your synthesis techniques.
To round up, the Beers Edge Detector 12HP module rightfully earns its spot in the hall of fame of eurorack cases for its design, functionality, and versatility. With its ability to tackle every aspect of gate signals and triggers, it opens up a vast horizon for musicians to explore, innovate, and create, guaranteeing an enhanced output in any modular synthesis setup.
Example Usage
The Beers Edge Detector 12HP module is a powerful tool for creating dynamic rhythmic patterns and engaging textures in your synth setup. To demonstrate its capabilities, let’s explore a novice-friendly example that leverages its 8-channel gate-to-trigger functionality.
Begin by connecting your audio or control signal to one of the odd-numbered input jacks. You can use a simple square wave oscillator set to a low frequency. The module will automatically convert this signal to a gate voltage that exceeds the 0.5V threshold, generating a trigger pulse each time the input signal transitions from low to high (the rising edge).
Now, take the output from this first channel and connect it to the input of your favorite drum trigger module or envelope generator. Adjust the pulse length on the Beers Edge Detector, starting at 50ms for a good visual marker of activity. As the oscillator generates its signal, observe how the output pulses are firing in sync with the rising edges of the input waveform, triggering your drum sounds.
For added rhythmic complexity, patch a secondary signal into an even-numbered input channel. Assume this second signal is a simple clock or a LFO. By doing this, you will be able to hear how the even-numbered outputs respond to the falling edges of the signal, creating complementary rhythms that enhance the overall pattern.
To further expand your rhythmic palette, utilize the OR combined outputs. Connect the ODD output to an additional sound source, such as a different percussion voice or melody generator. The ODD output will pulse whenever any odd-numbered channel sees a rising edge. Now, patch the EVEN output to another sound source to see how it interacts with the first. The ALL output captures signals from both ODD and EVEN, allowing you to create dense, layered rhythmic sequences.
Experiment with the 'enable' inputs on the ODD and EVEN outputs to control when the combined output sends pulses to the ALL jack. This functionality acts as a gate, allowing you to introduce variations and control dynamics in your performance. With some tweaking of the pulse length and careful selection of input signals, you can create a complex web of interactions that can provide extensive creative potential.
In this way, the Beers Edge Detector can serve both to expand your rhythmic capabilities and to refine your sound design strategies. By simply adjusting inputs and outputs, you unlock a world of pulse potential that elevates your eurorack experience.
The Beers Edge Detector 12HP excels at transforming standard gate signals into dynamic trigger pulses, making it a versatile addition to your modular setup. To illustrate its capabilities, let’s explore a practical usage example that highlights its functionality.
Imagine you’re working with a classic 16-step sequencer outputting a 5V gate signal. You connect this gate signal to Odd Channel 1 of the Edge Detector. As each step of the sequencer triggers, the Edge Detector converts these gates into precisely timed trigger pulses. By adjusting the maximum pulse length knob on Channel 1, you set this to a medium value of 250ms. Now, whenever the sequencer steps high, your connected synth voice—say a drum sound—will receive a clean and consistent trigger that creates a distinct rhythm.
Now, let’s enhance this setup by utilizing the Even channels. Suppose you wish to create a syncopated effect. You feed a similar gate signal, which is slightly delayed, into Odd Channel 2. Leave Even Channel 2 unpatched, allowing it to produce a pulse on the falling edge of the gate signal from Channel 1. As a result, this will output a trigger right after the end of your primary pulse, generating an interesting interplay of sounds between the two channels.
By mixing the outputs, you can use the OR-combined outputs labeled ODD and EVEN. Engaging both will create a rich rhythmic sequence since the pulses from both odd and even channels are combined, effectively doubling the tempo of your base signal. If you further patch an external signal to the enable input on the Even output, you can gate or mute the combined output. This adds another layer of control to your sequencing, allowing you to drill down on beats when desired.
The normalization of inputs ensures that if no signal is patched into the Even channels, you’ll still get a trigger from the preceding odd output, maintaining flexibility without losing sync. This allows for a less manual setup and ensures that your rhythms remain tight and responsive.
Consider using the ALL output for more complex modulation. If you’re feeding a variety of signals into multiple channels, the combined output will provide a pulse whenever any of the channels output a trigger. This is particularly useful for driving a sequencer or modulation source that needs to react to multiple rhythms simultaneously.
In this example, the Beers Edge Detector not only enhances your synthesis by clarifying and punctuating gates into useful triggers but also encourages creative experimentation with rhythmic patterns and control, unlocking a new dimension in your modular performance.
Further Thoughts
The Beers Edge Detector 12HP module excels in creating rhythmic variations and intricate pulse patterns, making it a powerful tool in the hands of an expert synth enthusiast. Imagine you have multiple signal sources at your disposal—whether they’re LFOs, envelopes, or audio-rate signals. The Edge Detector can convert these incoming signals into distinct triggers that unlock the pulse potential of your entire Eurorack system.
Start with patching an audio signal—let’s say a kick drum sound—into one of the odd-numbered channel inputs. Set the adjustable maximum pulse length on that channel to around 100ms for a standard percussive trigger. As the kick sound crosses the 0.5V threshold, a pulse is generated precisely on the rising edge. Now, for added complexity, send LFOs into the even-numbered channels, configured to produce falling-edge triggers. This setup allows for precise control of how each pulse interacts, resulting in advanced gate sequencing that adds dynamic layering to your rhythm.
The module’s normalization feature can be compelling; with nothing plugged into the even-numbered channels, they automatically respond to the odd-numbered inputs above them. This means for every kick pulse generated, the LFOs also trigger pulses in sync. What results is a tight, intricate pulse sequence that can be further extended by sending the ODD and EVEN outputs into a polysynth or effects processor, using the OR-combined outputs as a master trigger for sequencers or drum machines.
For even more versatility, patch a rhythm into the 'enable' inputs. When you send a clock signal to enable one of the outputs, you essentially introduce a gate that can mute or activate the combined pulses, allowing for a performance-oriented tweaking of the output dynamics. The combination of rising and falling edges from gates creates an output that effectively doubles the pulse frequency, which is superb for driving modular sequencers or modulation sources, achieving a polyrhythmic feel effortlessly.
Finally, experiment with feeding a quantized CV signal into the Edge Detector. As the input signal fluctuates, the rising and falling edges produce a constantly evolving rhythmic structure. Adjust the pulse length dynamically during performance to morph the character of your sequences live, creating a deeply textured sonic landscape that breathes in tandem with your rhythmic intentions. By mastering these techniques, the Beers Edge Detector becomes an indispensable part of a sophisticated module setup that thrives on complexity and musical expression.