Reviving the Psychedelic 70s with the Farfisa Polychrome Phaser Eurorack Module Adaptation

The Farfisa Polychrome Phaser was one of the most beloved effects pedals of the 1970s, used by psychedelic rock groups such as Pink Floyd and David Bowie. Thanks to G-Storm Electro, it has been resurrected in the form of a 4HP Eurorack module.

The Polychrome Phaser Eurorack module adaptation features a 6-stage phaser section from the original Italian Stallion along with four knobs - FREQ, RES, RATE, and MOD AMT, and a bi-polar activity indicator LED for internal LFO or external CV. The FREQ knob controls the initial frequency of the phaser effect, while the RES knob controls the depth of the effect. The RATE knob controls the speed of the internal LFO, providing a range from X hz to X Khz, and the MOD AMT controls how much the internal LFO affects the frequency. If an external signal is plugged into the CV input, the MOD AMT knob instead controls how much that external signal affects the frequency.

The IN jack is where users can connect their audio signal into the module, and the CV JACK can be used with an external signal to control the frequency, bypassing the internal LFO. The OUT JACK provides the audio output of the phaser. Additionally, there are trimmers for initial frequency and LED adjustment, labeled TR1 and TR2 respectively.

Overall, the Farfisa Polychrome Phaser Eurorack Module Adaptation is perfect for those who want to add a touch of the psychedelic sounds from the 70s to their music. The module offers the opportunity to create unique swirling sounds that are sure to spice up any production or performance. Check the Reverb store for availability.

Example Usage

If you're new to using phaser modules and want to try out the Farfisa Polychrome Phaser adaptation, here's a simple setup to get you started. First, connect your audio source to the IN jack and your speakers or headphones to the OUT jack. Set the FREQ knob to around 12 o'clock and the RES knob to about 9 o'clock. Then, slowly turn up the RATE knob until you start hearing the phaser effect. You can use the MOD AMT knob to adjust the intensity of the effect. Try experimenting with different settings on the MOD AMT and RATE knobs to find the sound that best suits your project. Remember, the Farfisa Polychrome Phaser is all about the psychedelic 70s vibe, so don't be afraid to get creative and try out some unconventional sounds!

An intermediate-level usage example for the Farfisa Polychrome Phaser Eurorack Module Adaptation would be to use it in conjunction with other modulation effects to create complex and evolving soundscapes reminiscent of the 70s psychedelic era. Start by patching an LFO into the CV input and adjusting the MOD AMT knob to control the amount of modulation being applied. Then, connect the output to a delay module and adjust the FREQ, RES, and RATE knobs to fine-tune the phaser effect. Use the TR1 trimmer to adjust the initial frequency and the TR2 trimmer to calibrate the LED indicator. Experiment with different wave shapes and frequencies to create unique and dynamic sounds.

Further Thoughts

The Farfisa Polychrome Phaser Eurorack Module Adaptation is perfect for creating a mind-bending psychedelic experience. By adjusting the FREQ and RES knobs, you can control the depth and frequency of the phaser effect. To add movement to your sound, experiment with the RATE and MOD AMT knobs, which control the speed of the internal LFO and the level of modulation respectively. For even more control, use an external signal to control the frequency with the CV JACK. The red/green bi-polar LED indicator provides visual feedback on the modulation activity. With this module, you can easily create classic 70s phaser effects that will transport your audience to another dimension.