First up is the Erica Synths Pico VCA2, a compact voltage-controlled amplifier module with improved features like bias control and manual offset adjustment. It offers two independent channels and can be used as a buffered audio splitter.
Next, we have the MachineRoom Trilobite, a triple saw-core oscillator module inspired by Moog schematics. It features four octave ranges, three waveforms, and independent LIN FM and PWM inputs. It also includes a white noise source and offers independent audio outputs for each oscillator.
For high-quality output, the Noise Engineering Sono Abitus module is recommended. It has stereo Eurorack-level inputs and provides a stereo pair of ¼" TRS line outputs and a ¼" headphone output. It allows for separate level control and easy monitoring while performing or recording.
The Knob Technology Agni module is a prideful creation combining a voltage-controlled amplifier (VCA), wavefolder, distortion, tone, feedback, and a passive filter. It offers a unique signal processing experience and the ability to modulate signals in the full audio range.
Lastly, the Mystic Circuits Idum module is an instant IDM gate processor that turns its input into complex electronic music effortlessly. It offers eight effect modes, an eight-step looper, and the ability to manipulate external sequencers using the clock output. It opens up new possibilities for music experimentation.
By harnessing the power of these modules, eurorack enthusiasts can create captivating and unique soundscapes, taking their music production to new heights. :internal_private_article_id: erica-synths-pico-vca2_machineroom-trilobite_noise-engineering-sono-abitus_knob-technology-agni_mystic-circuits-idum
In the article "Patch Playground: Crafting Eurorack Magic with Erica Synths, MachineRoom, Noise Engineering, Knob Technology, and Mystic Circuits," we explore the exciting possibilities of combining several Eurorack modules.
First up is the Erica Synths Pico VCA2, a compact voltage-controlled amplifier module with improved features like bias control and manual offset adjustment. It offers two independent channels and can be used as a buffered audio splitter.
Next, we have the MachineRoom Trilobite, a triple saw-core oscillator module inspired by Moog schematics. It features four octave ranges, three waveforms, and independent LIN FM and PWM inputs. It also includes a white noise source and offers independent audio outputs for each oscillator.
For high-quality output, the Noise Engineering Sono Abitus module is recommended. It has stereo Eurorack-level inputs and provides a stereo pair of ¼" TRS line outputs and a ¼" headphone output. It allows for separate level control and easy monitoring while performing or recording.
The Knob Technology Agni module is a prideful creation combining a voltage-controlled amplifier (VCA), wavefolder, distortion, tone, feedback, and a passive filter. It offers a unique signal processing experience and the ability to modulate signals in the full audio range.
Lastly, the Mystic Circuits Idum module is an instant IDM gate processor that turns its input into complex electronic music effortlessly. It offers eight effect modes, an eight-step looper, and the ability to manipulate external sequencers using the clock output. It opens up new possibilities for music experimentation.
By harnessing the power of these modules, eurorack enthusiasts can create captivating and unique soundscapes, taking their music production to new heights.
Example Usage
Once you have your Eurorack system set up and ready to go, it's time to start exploring the endless possibilities of patching. In this example, we'll be using the Erica Synths Pico VCA2, MachineRoom Trilobite, Noise Engineering Sono Abitus, Knob Technology Agni, and Mystic Circuits Idum modules to create a unique and dynamic sound.
First, let's start by generating some sound with the MachineRoom Trilobite. Connect the Trilobite's independent audio outputs to the input of the Erica Synths Pico VCA2's first channel. Adjust the VCA's bias control to set the initial volume level.
Next, let's add some effects to our sound. Take the output of the Erica Synths Pico VCA2 and connect it to the input of the Knob Technology Agni module. Experiment with the wavefolder and distortion controls to add some grit and character to the sound. You can also use the tone and feedback controls to further shape the timbre.
Now, let's shape the output of our patch. Take the output of the Knob Technology Agni module and connect it to the input of the Noise Engineering Sono Abitus. Use the separate level controls to adjust the output volume for the line output and headphone output.
Finally, let's add some dynamic gate processing to our patch using the Mystic Circuits Idum module. Take the gate output from your sequencer or another source and connect it to the input of the Idum. Use the Mode knob to select one of the eight effect modes, such as HOLD, BURST, or MULTIPLY/DIVIDE. Experiment with the CHANCE and LENGTH sliders to control the likelihood and duration of the effect.
With this patch setup, you can create a wide range of sounds and textures by tweaking the various controls and exploring different combinations of effects. Remember to experiment and let your creativity guide you as you craft your eurorack magic with these modules. Happy patching!
To create a patch using the Erica Synths Pico VCA2, MachineRoom Trilobite, Noise Engineering Sono Abitus, Knob Technology Agni, and Mystic Circuits IDUM, follow these steps:
- Start by sending a sequence from your favorite sequencer to the V/Oct input of the MachineRoom Trilobite. Adjust the frequency range and waveform settings to your liking.
- Take the individual audio outputs of each oscillator on the Trilobite and route them into separate inputs of the Erica Synths Pico VCA2. Use the manual bias adjustment on the top VCA to add some modulation depth to the sound.
- Connect the output of the Pico VCA2 to the input of the Knob Technology Agni. Experiment with the wavefolding and distortion controls to shape the sound further. Use the passive filter section to sculpt the frequency content.
- Take the output of the Agni and send it into the input of the Noise Engineering Sono Abitus. Adjust the level controls for the line output and headphone output to balance the overall sound.
- Now, take the output of the Sono Abitus and send it to one of the inputs of the Mystic Circuits IDUM. Play around with the different effect modes (such as BURST or DELAY) to add rhythmic variations and dynamics to the sound.
- Finally, use the CV modulation inputs on the IDUM to further modulate the different effect parameters. You can assign control voltages from LFOs or envelopes to add movement and variation to the patch.
By combining these modules in this way, you can create a complex and evolving sound patch with rich textures, modulation possibilities, and rhythmic variations. Experiment with different settings and modulation sources to unleash the full potential of this patch playground. Have fun crafting eurorack magic!
Further Thoughts
In this patch, we will use the Erica Synths Pico VCA2, MachineRoom Trilobite, Noise Engineering Sono Abitus, Knob Technology Agni, and Mystic Circuits IDUM to create a dynamic and expressive Eurorack setup.
First, let's start by creating a complex melodic sequence using the MachineRoom Trilobite. Set up three oscillators with different waveforms - triangle, square, and saw - and use the UNISON control to detune them slightly. This will add thickness and depth to the sound. Connect the V/oct input of the first oscillator to a sequencer to control the pitch, and set the other two oscillators to track the first one. Experiment with different octave ranges and modulation sources to create interesting melodic patterns.
Next, let's add some texture and movement to the sequence using the Erica Synths Pico VCA2. Patch the output of the Trilobite into the audio input of the first VCA on the Pico VCA2. Adjust the bias control to introduce manual offset and create subtle vibrato effects. Now, connect the audio and CV inputs of the first VCA to the second VCA. This will allow the Pico VCA2 to act as a buffered audio splitter and give you more flexibility in shaping the sound. Use the second VCA to add dynamics and control the amplitude of the sequence.
To add depth and space to the sound, let's bring in the Noise Engineering Sono Abitus. Patch the audio output of the Pico VCA2 into one of the stereo inputs on the Sono Abitus. Connect the line output of the Sono Abitus to a mixer or audio interface, and use the headphone output for monitoring. Adjust the level controls on the Sono Abitus to balance the audio signal and the headphone output. The Sono Abitus will provide high-quality line-level outputs and allow you to easily monitor your performance or recording.
Now, let's shape and process the sound further with the Knob Technology Agni. Patch the audio output of the Sono Abitus into the VCA input of the Agni. Adjust the parameters of the Agni to add wavefolding, distortion, filtering, and feedback to the sound. Experiment with different settings and modulation sources to find the right balance between harmonic richness and gritty textures. The Agni will add character and complexity to the sound, allowing you to create unique timbres and textures.
Finally, let's add some dynamic effects and sequencing possibilities using the Mystic Circuits IDUM. Patch the CV output of the Trilobite into the clock input of the IDUM, and connect the gate outputs of the Trilobite to the gate inputs of the IDUM. Experiment with the different effect modes on the IDUM - HOLD, BURST, MULTIPLY/DIVIDE, BALL, ROTATE, DELAY, BREAK, and SKIP - to manipulate the gates and sequences in real-time. Adjust the CHANCE and LENGTH sliders to control the likelihood and duration of the effects. The IDUM will add a touch of unpredictability and playability to your patch, allowing you to create dynamic and evolving musical patterns.
With this setup, you have a powerful and versatile Eurorack system that combines the unique capabilities of the Erica Synths Pico VCA2, MachineRoom Trilobite, Noise Engineering Sono Abitus, Knob Technology Agni, and Mystic Circuits IDUM. Experiment with different patch configurations, modulation sources, and sequencing techniques to unlock endless sonic possibilities and create your own Eurorack magic.