The ST Modular SEND Eurorack Module is a versatile and creative tool for processing audio signals. It allows for precise adjustments to the portion and frequency of the signal sent to external effects and returned to the module. The module comes with two AUX Send and Return inputs, with a mono INPUT and LEVEL attenuator which can send any signal fed in directly to the stereo outputs OUT L and OUT R. The portion of the signal sent to the SEND A or SEND B output can be adjusted by turning the corresponding potentiometer to the right. This can then be fed into an external effect and returned in mono or stereo to the upper RETURN (L) and RETURN (R) inputs.
The TONE potentiometer provided with SEND module accentuates either low (turn to the left) or high frequencies (turn to the right) of the signal routed to the send output. However, it is recommended to leave it in the center position so that the frequencies are not affected. The same applies to SEND B, the lower inputs RETURN (L) and RETURN (R), and the corresponding potentiometers SEND B and TONE. Both sends can be used simultaneously according to the user's preference.
The two LEDs present in the SEND module accurately indicate if a signal is being sent to the send output. Gain trimmers are located on the front panel to adjust the gain of the send signal. The module also features built-in polarity protection. All these controls provided with the SEND module make it a great tool for signal routing and external effect processing.
The ST Modular SEND Eurorack module is indeed an amazing performance tool that lets you interact directly with the effects applied to your sounds. The compact size and intuitive design of the module make it easy for musicians and audio engineers alike to harness its full potential. To sum it up, with its AUX Send and Return inputs, Tone control, input level attenuator, LED indication, and gain trimmers, the ST Modular SEND Eurorack Module is a creative tool that brings a new dimension to your music production.
Example Usage
If you're new to using the ST Modular SEND Eurorack Module, a great way to start exploring its creative possibilities is by using it to send a drum loop from your sequencer to an external effects processor like a delay or reverb unit. First, connect the output of your sequencer to the input of the SEND module and adjust the input level attenuator to set the desired level. Next, connect the SEND A output to the input of your effects processor and adjust the SEND A and TONE potentiometers to shape the tone of the sent signal. Finally, connect the output of the effects processor to the RETURN (L) and/or RETURN (R) inputs of the SEND module and adjust the gain trimmer to set the desired level of the effected signal. You can then blend the dry and wet signals using the level attenuator and the SEND A and B potentiometers to achieve a wide range of creative effects.
An intermediate level usage example for the ST Modular SEND Eurorack Module is to connect it to a reverb effect that will add depth and spaciousness to your sound. To do this, connect the SEND A output to the input of the reverb effect, then connect the output of the effect to the RETURN L and RETURN R inputs of the SEND module. Adjust the SEND A potentiometer to set the level of the signal being sent to the effect, and use the TONE control to accentuate the low or high frequencies of the sound before it is sent to the reverb effect. The SEND B output can also be used simultaneously to send a different part of the signal to another effect or for parallel processing. Use the gain trimmers on the front panel to adjust the gain of the send signal to prevent distortion or clipping. The LED indication will show you when a signal is being sent to the send outputs, making it easy to see at a glance when you're sending signal to your external effects.
Further Thoughts
The ST Modular SEND Eurorack Module provides immense creative possibilities when incorporating external effects for sound processing. With the ability to adjust the portion of the signal sent to the SEND A output and route it to an external effect, you can tailor your sound to achieve the desired effects. The TONE potentiometer allows accentuating low or high frequencies of the sent output, providing further sound shaping. You can use SEND B and its corresponding potentiometers simultaneously, allowing for even more flexibility in sound manipulation. Additionally, gain trimmers on the front panel give control over the gain of the send signal. So, with the ST Modular SEND Eurorack Module, you can directly interact with the effects applied to your sounds and create unique textures and timbres never heard before.