Optimizing CPU Usage: Push2 Screen On/Off 0.1 - A Max4Live Device Review

The Push2 Screen On/Off 0.1 is a novel Max4Live utility device constructed by the innovative Apopt. This unique tool offers users the ability to optimize CPU usage by nullifying the screen of the Push2 controller, simultaneously implementing a tablet or phone solution such as Lemur or TouchOSC.

Unlike the typical approach, this Max4Live device essentially frees up valuable CPU resources by hindering the activation of the 'Push2DisplayProcess.app' when the Push2 controller is connected to a system. It efficiently achieves this by relocating a directory labeled 'Base'--intrinsically embedded in the Push2DisplayProcess--out of the Live folder structure. Ingeniously, the functionality of the Push2 controller is not hampered despite the screen's dormancy and the consequential conservation of CPU resources.

The process to revert the Base folder back to its original location when it's time to utilize the screen of the Push2 controller again, is breezily accomplished by this device. This provides users the benefit of retaining the native functions of the Push2 without experiencing any resource depletion due to the screen's operation. One noteworthy aspect of this device is that it doesn't make use of 'imp.push', keeping the control surface in the MIDI Live preference intact.

This device's design, based on a suggestion from @borrierulez, has been wakefully tested on Mac environments, illustrating Apopt's diligence when it comes to performance trials. In the spirit of resource conservation and maximizing productivity, the Push2 Screen On/Off 0.1 has readily staked its claim as an indispensable utility tool in the Max4Live echelon.

For users seeking to test and utilize this device, it is readily available for download and has already seen a fair share of downloads since its addition on October 27, 2023. Prospective users wanting to understand the device better can directly reach out to Apopt for further insights, operating instructions, or support queries.

Despite its screening operations, the Push2 Screen On/Off 0.1 is no hidden gem. It has swiftly emerged as a reliable Max4Live utility tool for electronic music enthusiasts globally. Fostering an effective synergy between software and hardware, the device amplifies performance without the expense of resources, and in a sphere where innovation is paramount, devices like these become vital companions.

Example Usage

Here's a novice-level usage example for the Push2 Screen On/Off 0.1 Max4Live device:

  1. Download and install the Push2 Screen On/Off 0.1 device from the provided link.
  2. Launch Ableton Live and open your project.
  3. Connect your Push 2 controller to your computer.
  4. In Ableton Live's preferences, go to the MIDI tab and make sure that your Push 2 is selected as the Control Surface.
  5. Locate the Push2 Screen On/Off 0.1 device in your Ableton Live browser under the Max for Live category.
  6. Drag and drop the device onto a MIDI track in your Ableton Live session.
  7. With the Push2 Screen On/Off 0.1 device selected, you will see a simple interface with a power button icon.
  8. Click on the power button to turn off the Push 2 screen. This will free up CPU resources that would have been used by the Push2DisplayProcess.app.
  9. If you want to use the Push 2 screen again, simply click on the power button icon to turn it on.
  10. You can now use your Push 2 controller without the screen consuming unnecessary CPU resources.

Remember that this device only controls the Push 2 screen and does not affect any other functionality or features of the controller.

Suppose you are performing live using Ableton Live and a Push 2 controller. You want to optimize your CPU usage by turning off the Push 2 screen and using a tablet or phone as a substitute interface. This allows you to free up CPU resources, as the Push 2's screen consumes some processing power. Here's how you can use the "Push2 Screen On/Off 0.1" Max4Live device to achieve this:

  1. First, download and install the "Push2 Screen On/Off 0.1" device from the Max4Live database.
  2. Once installed, open Ableton Live and go to the Max for Live folder in the browser.
  3. Drag and drop the "Push2 Screen On/Off 0.1" device onto a MIDI track.
  4. Connect your Push 2 controller to your computer via USB and make sure it is recognized by Ableton Live.
  5. In Ableton Live's preferences, navigate to the "MIDI" tab. Under the "Control Surface" section, choose the "Push 2" as your control surface.
  6. Now, select the MIDI track with the "Push2 Screen On/Off 0.1" device and make sure it is armed for recording.
  7. Play and perform your music as you normally would using the Push 2 controller. While doing so, monitor your CPU usage to see the impact of the device.
  8. Once you are ready to turn off the Push 2 screen, activate the "Push2 Screen On/Off 0.1" device by toggling its on/off switch or triggering its designated MIDI control.
  9. The Push 2 screen will now turn off, and you can use a tablet or phone running Lemur, TouchOSC, or any other similar app as your new interface.
  10. Monitor your CPU usage again and observe the improvement in performance with the Push 2 screen turned off.
  11. To restore the Push 2 screen, simply deactivate the "Push2 Screen On/Off 0.1" device by toggling its switch or triggering the MIDI control.

By using the "Push2 Screen On/Off 0.1" Max4Live device, you can easily optimize your CPU usage during live performances while still retaining the native functionality of the Push 2 controller. Give it a try and experience the benefits of freeing up valuable processing power!

Further Thoughts

One expert-level usage example of the "Push2 Screen On/Off 0.1" Max4Live device is when you're performing live and want to optimize CPU usage by turning off the Push 2 screen. By doing so, you can allocate more resources to running your music production software smoothly and efficiently. With the Push2 Screen On/Off device, you can disable the Push 2 screen and replace it with a tablet or phone solution, such as Lemur or TouchOSC.

This proves to be especially beneficial when monitoring your CPU usage while using the Push 2, as the "Push2DisplayProcess.app" on Mac consumes a certain amount of resources. By moving the "Base" folder (within the Push2DisplayProcess) out of the Live folder structure, the device prevents the app from starting as soon as you connect the Push 2.

Once you're ready to use the Push 2 screen again, you can easily put the "Base" folder back into its original location. Unlike using imp.push, this device is suitable even if you're using the Push 2 as a Control Surface in the MIDI Live Preferences. Therefore, you can enjoy the native functions of the Push 2 without losing any resources due to the screen.

It's important to note that this device has been tested on Mac only so far. If you encounter any issues, have questions, or wish to provide suggestions relating to this patch, feel free to reach out for support.

In summary, the "Push2 Screen On/Off 0.1" Max4Live device is a useful utility tool that lets you optimize CPU usage by disabling the Push 2 screen. This frees up resources for running your music production software while still retaining the functionality of the Push 2. Give it a try and experience enhanced performance during your live sets.

links

social